Schneider XW Configuration Tool, Version 1.00
Model: RNW8651155
GTIN: 785901431589
Installation Guide (PDF Download)
Introducing Conext Configuration Tool
Conext Configuration Tool is a PC-based software tool for configuring Conext SW/XW/XW+ Inverter/Charger Systems on a Xanbus™ network.
Conext Configuration Tool is not intended to replace the Conext System Control Panel (SCP), but it does incorporate the same configuration settings while simplifying the task of system configuration. You will still require the SCP to monitor inverter/chargers and other devices on your Xanbus network.
Conext Configuration Tool Functions
Conext Configuration Tool functions include:
- System Configuration. Use the Configuration Wizards to quickly get your system up and running.
- Device Configuration. Configure individual settings for Xanbus network devices, including Conext XW+, Conext XW, and Conext SW Inverter/ Chargers, Conext MPPT 80 600 and Conext MPPT 60 150 Solar Charge Controllers, Conext System Control Panel, Conext Automatic Generator Start, and Conext Battery Monitor.
Before using Conext Configuration Tool, familiarize yourself with the installation and operation of the Conext XW+ Inverter/Charger and other devices on your Xanbus network. For more information, see the Conext XW+ Inverter/Charger Installation Guide and the Conext XW+ Inverter/Charger Owner’s Guide.
System and Hardware Requirements
To install and operate Conext Configuration Tool, you will need a laptop or personal computer running Windows XP (SP3 or later), Windows Vista or Windows 7/8.
You will also need an available Universal Serial Bus (USB) port on your computer. Before installing Conext Configuration Tool, ensure your computer’s USB hub is installed and working properly.
Features
| Brand | SCHNEIDER ELECTRIC |
| Manufacturer Part Number | RNW8651155 |
| Warranty | 2-years |
| Function | Update firmware |
| Length | 12.8 |
| Width | 9.5 |
| Height | 2.5 |
| Weight | 1.2 |
| Volume | 304.0 |
